Environment & Safety Gas Processing/LNG Maintenance & Reliability Petrochemicals Process Control Process Optimization Project Management Refining

Piping

HP Water Management: Passivation in cooling water circuits

MarTech Systems, Inc.: Huchler, L. A.

Passivation—the formation of a corrosion-resistant oxide on a clean metal surface—is the key to optimizing system reliability on the waterside of heat exchangers. Most plant personnel are aw..

What are the ‘magnificent seven’ elements to successfully pick a contractor?

Valuable pointers help industrial plant managers minimize downtime, maintain quality and safety to improve operations

HP Reliability: Alignment choices have consequences

Hydrocarbon Processing Staff: Bloch, Heinz P.

Optimists tell us about steady industry trends toward reliability-imparting procedures and work processes, while realists continually make us aware of pressures to reduce expenditures. As outside obse..

Avoid condensation-induced transient pressure waves

BP Canada Energy Co.: Mani, G.

Case studies give an indication as to probable causes for water hammer

Case 60: Socket-weld failures

Consulting Engineer: Sofronas, A.

A risk analysis can determine which critical welds to repair

Safe detection of small to large gas releases

General Monitors: Naranjo, E.  |  Baliga, S.
Gassonic: Neethling, G. A.
Safety Consulting and Process Engineering Analysis: Plummer, C. D.

Look at these advantages in using ultrasonic leak detectors

Genesis Energy grabs a 50% interest in Cameron Highway Oil Pipeline

Genesis Energy has executed a definitive agreement to purchase Valero Energy’s indirect 50% equity interest in Cameron Highway Oil Pipeline, a partnership, for $330 million in cash.

Innovations in plastic gas piping being put to good use

Officials from George Fischer Central Plastics (GFCP) and Arkema Inc. announced that the Mid-Tex Division of Atmos Energy Corp. has recently completed a 10.5-mile installation of 4-inch, DR-11, Hyperplast polyamide-11 pipe. This

Spiral-wound or kammprofile gaskets?

Chevron Richmond Refinery: Reeves, D. W.
Garlock Sealing Technologies: Yoder, C.

There appears to be a shift toward the latter, but the choice isn’t always clear. Here’s where best to apply each type.

HP Reliability: Eccentric reducers and straight runs of pipe at pump suction

Hydrocarbon Processing Staff: Bloch, Heinz P.

Questions relating to proper reducer application in centrifugal pump suction lines date back many decades. Until his death (at age 84, in 1995), world-renowned pump expert Igor Karassik frequently cor..