Maintenance & Reliability
Viewpoint: The pathway towards autonomy: How process automation is building the future plant
<i>Hydrocarbon Processing </i> sat down with Jason Urso (JU), Chief Technology Officer, Honeywell Process Solutions, to discuss the current state of the process automation industry, how new technologies are enhancing efficiency and safety, and what the future holds for automation.
Pressure swing adsorption vessels fatigue analysis
The hydrogen (H<sub>2</sub>) plant in a refinery produces high-purity (99.9+ vol%) H<sub>2</sub> products using a licensed pressure swing adsorption (PSA) purification process to fulfill the H<sub>2</sub> makeup needs of refinery hydroprocessing facilities.
Creating opportunities for future fluid machinery experts
The state of understanding science and facts on one side and distinguishing these from anecdotes and often far-fetched opinions on the other side should be concerning to us. Institutions of higher learning can be disinclined to teach needed, applicable or actionable knowledge.
Choosing the proper regulator configuration can reduce droop
Many factors go into selecting the proper regulator for your system. One of those factors is sensitivity to changes in outlet pressure as downstream flow fluctuates, which is often characterized as “droop” as illustrated within a regulator’s flow curve.
Developing and utilizing a novel, toughened epoxy adhesive
When identifying solutions that can offer assurance and longevity, the maintenance and reliability of asset repairs can be challenging.
Storage tank settlement and soil-side corrosion assessment with optimized repair strategy
Aboveground storage tanks are used in several industries with different fluid services. These
HRSG water/steam sampling: Do it right or face potential consequences
Many large industrial facilities—including refineries, and chemical and petrochemical plants—are increasingly turning to co-generation for process steam and power production.
Valves, Pumps and Turbomachinery: Achieving the right installation torque with a virtual calculation
Determining the required installation torque for a tight flange system is a daily challenge for industrial valve manufacturers and plant operators.
Reliability: When to consider liquid-ring compressors
Liquid-ring compressors (FIG. 1) use the centrifugal whirling of a sealing liquid to create a series of piston-like water columns to trap gas or vapor between the impeller cells of a rotor installed eccentric to its casing.
The downstream rundown: In case you missed it 6/17
In case you missed any downstream news, this piece will give you a summary of some of the top stories from last week.
- CLG and INA successfully produce SAF from biogenic feedstock 7/29
- HAMR Energy announces plans for Australia’s first major methanol-to-jet fuel facility 7/29
- Johnson Matthey’s tech enables successful start-up of the world’s largest single-train methanol plant 7/29
- Clariant and Shanghai Boiler partner to develop green methanol/ammonia and SAF projects in China 7/29
- China ramps up exports of refined fuels as margins rise 7/29
- Baker Hughes to acquire Chart Industries for $13.6 B 7/29
