Catalyst Technology Update
Raise efficiency of ultra-low SHR production of styrene monomer with a novel catalyst formulation
The production of styrene monomer from ethylbenzene requires superheated steam as an energy source, as well as dehydrogenation catalysts to facilitate the reaction. As steam generation poses the highest influence on production costs, significant effort has been devoted to optimizing process design.
The optimal catalyst makeup in an FCC unit
Fluid catalytic cracking (FCC) is one of the key process technologies in the refining industry. The FCC unit increases refining margins by upgrading low-value streams, such as vacuum gasoils or atmospheric and vacuum residues, to more valuable products, such as propylene, butylenes and high-octane naphtha.
Improve FCC yields from contaminated feeds using boron-based nickel passivation
The drive to improve refinery margins leads to the processing of heavier, more contaminated crude and, consequently, an increasing amount of contaminants in fluid catalytic cracking (FCC) feedstock. Of these, nickel (Ni) deposits on the FCC catalyst and catalyzes dehydrogenation reactions, producing unwanted hydrogen (H2) and contaminant coke. These effects diminish the profitability and operability of the FCCU, creating strong demand for Ni passivation technology. Ni passivation is especially beneficial when the FCCU operates at the wet gas compressor (WGC), regenerator temperature limit, or air limit.
- Petrobras delivers LPG sold at steep premiums despite Lula move to annul auction 4/3
- Plug Power to supply 275-MW GenEco electrolyzer system for Hy2gen’s Courant decarbonized ammonium nitrate project 4/3
- Vietnam refinery boosting jet fuel production 4/3
- China plans to upgrade some petrochemical plants, phase out others by 2029 4/3
- Morocco has diesel stocks for 51 days, energy ministry says 4/3
- Nigeria's Seplat Energy hit by strike amid push for higher output 4/3
