August 2018
Water Management
Options for meeting wastewater effluent selenium limits
Wastewater treatment units (WWTUs) in petroleum refineries are designed to meet effluent limitations incorporated into National Pollutant Discharge Elimination System (NPDES) permits for “conventional pollutants.”
The Authors
Matthew Gerhardt is Vice President of industrial water at Brown and Caldwell, specializing in wastewater selenium and trace metals removal. He started his career at Chevron Research Co. and has more than 30 yr of experience in refinery water and wastewater treatment. He holds a BS degree in chemical engineering from Cornell University and a PhD in civil/environmental engineering from UC Berkeley.
Thomas Steinwinder is Managing Engineer and Market Sector Director of oil and gas at Brown and Caldwell, specializing in water and wastewater treatment at petroleum refineries and petrochemical plants. He has 12 yr of experience in design, bench and pilot testing, operations and project management. He holds a BA degree from Vanderbilt University and an MS degree in civil/environmental engineering from Auburn University.
Related Articles
- Causes and countermeasures for a compressor lube oil system failure due to delayed oil pressure recovery by an auxiliary lube oil pump
- Application of systems engineering principles in a reliability assessment of air-cooled heat exchangers
- The implementation and automation of an alarm management system in a complex control environment at KNPC’s Mina Al-Ahmadi refinery
Comments